This Cisco SFP-1GB-SX compatible SFP transceiver provides 1000Base-SX throughput up to 550m over multi-mode fiber (MMF) at a wavelength of 850nm using a LC connector. Digital optical monitoring (DOM) support is also present to allow access to real-time operating parameters. Our transceiver is guaranteed to be 100% compatible with the equivalent Cisco transceiver. This easy to install, hot sw ...
This Cisco GLC-LX-SM-RGD compatible SFP transceiver provides 1000Base-LX throughput up to 10km over single-mode fiber (SMF) at a wavelength of 1310nm using a LC connector. It is also capable of withstanding rugged environments and can operate at temperatures between -40°C to +85°C. Digital optical monitoring (DOM) support is also present to allow access to real-time operating paramet ...
This Finisar FTLX1471D3BCL compatible SFP+ transceiver provides 10GBase-LR throughput up to 10km over multi-mode fiber (MMF) at a wavelength of 1310nm using a LC connector. Digital optical monitoring (DOM) support is also present to allow access to real-time operating parameters. Our transceiver is guaranteed to be 100% compatible with the equivalent Finisar transceiver. This easy to install ...
This SFP+ transceiver module is designed for use with HP network equipment and is equivalent to HP part number J9151A. This transceiver is built to meet or exceed the specifications of the OEM and to comply with Multi-Source Agreement (MSA) standards. This product is 100% functionally tested, and compatibility is guaranteed. The transceiver is hot-swappable input/output device which allows a ...
The industry-standard Compatible Cisco Small Form-Factor Pluggable (SFP) Gigabit Interface Converter is a hot-swappable input/output device that plugs into a Gigabit Ethernet port or slot, linking the port with the network. SFPs can be used and interchanged on a wide variety of Cisco products and can be intermixed in com ...
The Cisco 100BASE-X Small Form-factor Pluggable (SFP) is a hot-swappable input/output device that plugs into a Fast Ethernet port or slot, linking the port with the network.
This product is Guaranteed 100% Compatible with the Manufacturer Original.
Compatible ProCurve Gigabit-LX-LC Mini-GBIC is a small form factor pluggable (SFP) gigabit LX transceiver that provides a full-duplex gigabit solution up to 10 km (singlemode) or 550 m (multimode).
Omnitron's Small Form Pluggable (SFP) and 10 Gigabit SFP+/XFP optical transceivers are interchangeable, compact media connectors. They enable a single network device to connect to a wide variety of fiber and copper cable types and distances.
Pluggable Optical Tranceivers are used to customize iConverter" , FlexPoint" , OmniConverter" and miConverter" products to meet specific networking p ...
The TN-SFP-XX Small Form Factor Pluggables (SFP) transceivers are designed for bi-directional serial optical data communications such as Gigabit Ethernet or Fiber Channel and speeds up to 1.25Gbps. The device is designed for use in Switches and routers compatible with Small Form Factor Pluggable Multi-Sourcing Agreement (MSA).
The AT-SPTX SFP Module is a latest industry standard in flexible, full-duplex Gigabit Ethernet connectivity. This hot-swappable, fiber interface simply plug into a SFP slot on Allied Telesyn SFP compatible products.
TL-SM311LM SFP (mini-GBIC) Module introduced for extending transfer distance, attached to managed/web smart switches. It can extend the distance to up 550 m which can basically satisfy the distance requirement of LAN.
This SFP (Small Form-factor Plug-in) transceiver enables one 1000BASE-SX connection. SFPs have a form factor one-half the size of current industry standards. SFPs can be mixed and matched on a given switch to maximize flexibility. However, the connection and associated port at the remote end must match the chosen SFP connection type. This SFP transceiver can be used in those 3Com switches and m ...
The ...
This easy-to-install Mini-GBIC (or SFP) module provides a simple way to add Gigabit functionality to your Linksys switch. Gigabit fiber is often used to connect two switches together. The technology used depends on the distance between the two switches.The SX module uses 850 nanometer wavelength light in multimode fiber optic cables, and can achieve distances up to 220 or 550 meters, depending ...
This product is NIB, Factory Sealed, and Guaranteed Authentic.
The industry-standard Cisco Small Form-factor Pluggable (SFP) Gigabit Interface Converter is a hot-swappable input/output device that plugs into a Gigabit Ethernet port or slot, linking the port with the network.
321-0435 1000BASE-SX SFP Transceiver incorporate advanced CDM technology derived from the Common Data Model (CDM) Architecture, a highly flexible approach to tracking the complexities of virtualized networks.
Ubiquiti Networks offers a variety of U Fiber™ modules and single-mode fiber cabling for your new installs and existing infrastructure upgrades.
Outdoor Fiber Installations
For long-distance runs of 300+ meters, use U Fiber 1G or 10G single-mode modules and BiDi models for maximum reuse of existing infrastructure. For shorter runs, ...
The AT-SPLX10 SFP Module is a latest industry standard in flexible, full-duplex Gigabit Ethernet connectivity.This Hot-swappable, fiber interface simply plug into a SFP slot on Allied Telesyn SFP compatible products.
Finisar's FTLF1318P3BTL Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). They simultaneously comply with Gigabit Ethernet as specified in IEEE Std 802.3 and 1x Fibre Channel as defined in FC-PI-4 Rev. 8.00. They are RoHS compliant and leadfree per Directive 2002/95/EC5 and Finisar Appl. Note AN-2038. Digital diagn ...
Cisco 1000BASE-LX SFP (mini-GBIC) Transceiver easy-to-install module that provide a simple way to add fiber connectivity or to add an extra Gigabit Ethernet port to your Cisco Small Business or Cisco Small Business Pro Series switches. The transceiver available for single-mode fiber-optic cabling and can support distance up to 10 kilometers.
This product has been tested and validated on Dell systems. It is supported by Dell Technical Support when used with a Dell system.
TL-SM311LS SFP (mini-GBIC) Module introduced for extending transfer distance, attached to managed/web smart switches. It can extend the distance to several kilometers even tens of kilometers which can basically satisfy the distance requirement of LAN.
Finisar's FTLF8519P3BNL Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). They are simultaneously compatible with Gigabit Ethernet as specified in IEEE Std 802.3 and Fibre Channel FC- PI-2 Rev. 5.0. They are RoHS compliant and lead-free per Directive 2002/95/EC and Finisar Application Note AN-2038. Digital diagnost ...
1000Base-SX SFP Transceiver Module is compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). 1000Base-SX SFP Transceiver Module is compatible with Gigabit Ethernet as specified in IEEE Std 802.32 and Fibre Channel FC- PI-2 Rev. 5.03. It is RoHS compliant and lead-free per Directive 2002/95/EC4 and Finisar Application Note AN-2038. Digital diagnostics functions are avail ...
The Cisco MFEFX1 100BASE-FX Mini-GBIC SFP Transceiver is an easy-to-install mini Gigabit Interface Converter (mini-GBIC) Small Form-Factor Pluggable (SFP) transceiver module that provides a simple way to add 100BASE-FX capability to your Cisco switch. The module operates at a wavelength of 1310 nm and supports multimode fiber optic cabling. In a typical operating environment, it can achieve dis ...
The Cisco 100BASE-FX SFP operates on ordinary multimode fiber-optic (MMF) link spans up to 2 kilometers (km) long.
GLC-FE-100FX modules operate in Fast Ethernet or dual-rate Fast/Gigabit Ethernet ports of Cisco switches and routers.
GLC-FE-100FX-RGD modules operate in Fast Ethernet or dual-rate Fast/Gigabit Ethernet ports of Cisco Industrial Ethernet and SmartGrid switches and route ...
The Dell™ SFP transceiver delivers fiber connectivity to extend the range of your network. This hot-pluggable transceiver with SFP (Small Form Factor Pluggable) footprint features a duplex LC connector. The Dell networking 1000BASE-T SFP transceiver provides 1000GbE connectivity up to m . Additionally, it provides a unique enhanced digital diagnostic monitoring interface, which allows rea ...
The Dell SFP transceiver delivers fiber connectivity to extend the range of your network. This hot-pluggable transceiver with SFP (Small Form Factor Pluggable) footprint provides a full-duplex mode with up to 1.25 Gbps bi-directional data transfer rate. The transceiver complies with Gigabit Ethernet and 1000Base-T standards such as IEEE stand 802.3z and IEEE stand 802.3ab.
1000Base-TX SFP Optical Module is high-performance, reliable, and cost-effective optical transceivers help enterprises and service providers meet the challenges of diverse network topologies. To ensure the highest level of quality, Foundry selected and tested the most reliable and best performing optical transceivers on the market, and we warrant their availability, capacity, and performance in ...
Gigabit networking is the upper echelon of performance, especially compared to 10 and 100 Mbps connections. Formerly Linksys Business Series, now Cisco Small Business Network Accessories, the MGBT1 10/100/1000 Base-T Mini-GBIC SFP Transceiver gives you the ability to tap into faster networking speeds with a standard RJ-45 connection. Installation is as easy as sliding it into an accompanying po ...
The AT-SPTX SFP Module is a latest industry standard in flexible, full-duplex Gigabit Ethernet connectivity.This hot-swappable, copper interface simply plug into a SFP slot on Allied Telesyn SFP compatible products.
This product is Guaranteed 100% Compatible with the Manufacturer Original.
The Cisco industry-standard 1000BASE-T Small Form-factor Pluggable (SFP) gigabit interface converter (GBIC) is a hot-swappable input/output device that plugs into a Gigabit Ethernet port or slot, linking the port with the network. The Cisco SFP provides full-duplex Gigabit Ethernet connectivity to high-end workstations and between wiring closets over existing copper network infrastructure.
To connect copper Ethernet cables to SFP ports, use the UF-RJ45-10G in an SFP+ port for speeds of up to 10 Gbps and distances of up to 30 m, or use the UF-RJ45-1G in an SFP port for speeds of up to 1 Gbps and distances of up to 100 m.
For short distances of 1 to 3 m, use the UDC-1, UDC-2, or UDC-3 direct attach passive copper cables between SFP+ ports for speeds of up to 10 Gbps.
Mellanox active optical and RJ45 cable modules provide outstanding performance for high-bandwidth fabrics, extending the benefits of Mellanox's high-performance InfiniBand and Ethernet adapters and switches throughout the network.
In addition to meeting or exceeding InfiniBand Trade Association (IBTA) and IEEE standards, Mellanox certified modules are 100% tested on Mellanox equipment to ...
Finisar's FCLF-8520-3/FCLF-8521-3 1000BASE-T Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA). They are compatible with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE Std 802.3. The 1000BASE-T physical layer IC (PHY) can be accessed via I2C, allowing access to all PHY settings and features.
The Cisco 100BASE-X Small Form-factor Pluggable (SFP) is a hot-swappable input/output device that plugs into a Fast Ethernet port or slot, linking the port with the network.
The Cisco 100BASE-LX10 SFP operates on ordinary single-mode fiber-optic (SMF) link spans up to 10 km long.
GLC-FE-100LX modules operate in Fast Ethernet or dual-rate Fast/Gigabit Ethernet ports of Cisco switches and routers.
GLC-FE-100LX-RGD modules operate in Fast Ethernet or dual-rate Fast/Gigabit Ethernet ports of Cisco Industrial Ethernet and SmartGrid switches and routers.
< ...Finisar's FTLX8571D3BCL 10Gb/s SFP+ transceivers are designed for use in 10-Gigabit Ethernet links over multimode fiber. They are compliant with SFF-84311, SFF-84322 and IEEE 802.3ae 10GBASE-SR/SW3. Digital diagnostics functions are available via a 2- wire serial interface, as specified in SFF-84724. The transceiver is RoHS compliant and lead free per Directive 2002/95/EC5, and Finisar Applicat ...
The Cisco 4-Gbps Fibre Channel SFP is designed to provide cost effective Fibre Channel connectivity for the Cisco MDS 9000 Fibre Channel switching modules.
Finisar's FTLF8524P2xNy Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA)1. They are compatible with Fibre Channel FC-PI-2 Rev. 7.02. Rate Selectable versions are also compatible with Gigabit Ethernet as specified in IEEE Std 802.33. They are RoHS compliant and lead-free per Directive 2002/95/EC4 and Finisar Applica ...
One of the key benefits of the Finisar 4.25 Gb/s transceivers is the ability to have exceptional performance at 1x, 2x, and 4x Fibre Channel, and in the same part also have exceptional performance at Gigabit Ethernet. This capability is due in part to the device's rate select feature. In defining rate select in this part, Finisar has followed all industry standards including the SFP MSA and the ...
Finisar's FTLX8571D3BCV 1G/10G Dual-Rate SFP+ transceivers are designed for use in 1-Gigabit and 10-Gigabit Ethernet links over multimode fiber. They are compliant with SFF-84311, IEEE 802.3-2005 10GBASE-SR/SW and 1000BASE-SX. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-84724. The FTLX8571D3BCV is a "limiting module", i.e., it employs a limitin ...
Cisco MDS 9000 Family 8-Gbps Fibre Channel switching modules deliver the intelligence and the high performance required to support the most demanding storage applications, providing the foundation for large scale Storage Area Network (SAN) consolidation.
The Small Form-Factor Pluggable 10 Gigabit Multi-Mode Limiting SFP+ (MMF SFP+) optical transceiver is a fully duplex serial electric, serial optical device with both transmit and receive functions contained in a single module that provides a high speed serial link at 10 Gbs. Installed into an appropriate host module, the MMF SFP+ provides a 10 Gigabit interface to the supporting system.
The Mellanox SFP Transceiver delivers fiber connectivity to extend the range of your network. This hot-pluggable transceiver with SFP (Small Form Factor Pluggable) footprint provides a full-duplex mode with up to 1.25 Gbps bi-directional data transfer rate. The transceiver complies with Gigabit Ethernet as IEEE STD 802.3z and IEEE Std 802.3ab.
For use in Mellanox CX3 10Gb NW Adapter Only ...
The industry-standard Cisco Small Form-Factor Pluggable (SFP) Gigabit Interface Converter is a hot-swappable input/output device that plugs into a Gigabit Ethernet port or slot, linking the port with the network.
The Small Form-Factor Pluggable (SFP) MSA (Multi Source Agreement) is a specification for a common interface for optical modular transceivers. The SFP connector consists of a 20-pin receptacle and an SFP housing cage. The connector provides the interface for the hot pluggable SFP module. Each SFP module contains a serial interface to provide identification information that describes the SFP cap ...
The Cisco 100Base-BX10 Small Form-factor Pluggable (SFP) is a hot-swappable input/output device that plugs into a Fast Ethernet port or slot, linking the port with the network. The Cisco 100BASE-BX10 SFPs operate on ordinary SMF single-strand link spans up to 10 kilometers long.
The adoption of 10Gb Ethernet is growing rapidly. For the majority of cabling runs up to 7 meters, clients can use Direct Attach Cable (DAC), especially when connecting servers within the same rack or between closely located racks. For longer distances, use short or long range transceivers and optical cables.
The Cisco 10GBASE-SR Module supports a link length of 26m on standard Fiber Distributed Data Interface (FDDI)-grade multimode fiber (MMF). Using 2000 MHz*km MMF (OM3), up to 300m link lengths are possible.
The Dell™ Networking 10GBASE-SR SFP+ transceiver provides 10GbE connectivity up to 400m. For use in qualified Dell Networking switches.
Cisco SFP-10G-SR-X
The Cisco SFP-10G-SR-X is a 10GBASE-SR module for extended operating temperature range. It supports a link length of 26m on standard Fiber Distributed Data Interface (FDDI)-grade multimode fiber (MMF). Using 2000MHz*km MMF (OM3), up to 300m link lengths are possible. Using 4700MHz*km MMF (OM4), up to 400m link lengths are possible.
This product is Guaranteed 100% Compatible with the Manufacturer Original.
The 1000BASE-BX-D and 1000BASE-BX-U SFPs, compatible with the IEEE 802.3ah 1000BASE-BX10-D and 1000BASE-BX10-U standards, operate on a single strand of standard SMF.
A 1000BASE-BX10-D device is always connected to a 1000BASE-BX10-U device with a single strand of standard SMF with an operating transmission range up to 10 km.
The Cisco SFP-10G-LR-X is a multirate 10GBASE-LR, 10GBASE-LW and OTU2/OTU2e module for extended operating temperature range. It supports a link length of 10 kilometers on standard single-mode fiber (SMF, G.652).
Ubiquiti Networks offers a variety of U Fiber™ modules and single-mode fiber cabling for your new installs and existing infrastructure upgrades.
Outdoor Fiber Installations
For long-distance runs of 300+ meters, use U Fiber 1G or 10G single-mode modules and BiDi models for maximum reuse of existing infrastructure. For shorter runs, ...
Ubiquiti Networks offers a variety of U Fiber™ modules and single-mode fiber cabling for your new installs and existing infrastructure upgrades.
Outdoor Fiber Installations
For long-distance runs of 300+ meters, use U Fiber 1G or 10G single-mode modules and BiDi models for maximum reuse of existing infrastructure. For shorter runs, ...
10Gb/s Single Mode Datacom SFP+ Transceiver is designed for use in 10-Gigabit Ethernet links up to 10km over Single Mode fiber. They are compliant with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-LR/LW.
The Cisco industry-standard Small Form-Factor Pluggable Interface Converter (SFP) for packet-over-SONET/SDH (POS), optical networking, and ATM applications is hot-swappable optical interfaces that plug into a variety of ports on Cisco router interfaces. This SFP optics support OC-3 data rates for short-reach.
The industry-standard Cisco Small Form-factor Pluggable (SFP) Gigabit Interface Converter is a hot-swappable input/output device that plugs into a Gigabit Ethernet port or slot, linking the port with the network.
The 1000BASE-ZX SFP operates on standard single-mode fiber-optic link spans of up to approximately 70 km in length. The SFP provides an optical link budget of 23 dB, but the prec ...
The Cisco SFP provides full-duplex 100-Mbps connectivity between switches over multimode fiber (MMF) infrastructures. It offers investment protection and an easy migration path for customers moving to Gigabit Ethernet connections in the future.
This product is Guaranteed 100% Compatible with the Manufacturer Original.
The Arista Optical Modules and Cables offer customers a wide variety of high-density and low-power 100 Gigabit, 40 Gigabit, 25 Gigabit, 10 Gigabit, 1 Gigabit, and 100 Megabit Ethernet connectivity options over fiber or copper media.
To accommodate an ever increasing spectrum of applications Arista offers a wide choice of QSFP and Small Form-Factor Pluggable (SFP) transceiver types th ...
The 10 Gigabit small form-factor pluggable (SFP+) module provides a full-duplex 10G bps each direction for Ethernet operation on NETGEAR managed switches. The switch will automatically detect the AXM762, so you can simply plug it into an available module slot. The module can be inserted or removed while the switch is operational.
The Cisco® 25GBASE SFP28 (Small Form-Factor Pluggable) portfolio offers customers a wide variety of high-density and low-power 25 Gigabit Ethernet connectivity options for data center and high-performance computing networks applications. The 25G Modules are based on SFP28 form factor.
The 1000BASE-ZX SFP operates on standard single-mode fiber-optic link spans of up to approximately 70 km in length. The SFP provides an optical link budget of 21 dB, but the precise link span length depends on multiple factors such as fiber quality, number of splices, and connectors.
When shorter distances of single-mode fiber (SMF) are used, it might be necessary to insert an inline opti ...
Ubiquiti Networks offers a variety of UFiber™ modules and single-mode fiber cabling for your new installs and existing infrastructure upgrades.
The Cisco® Coarse Wavelength-Division Multiplexing (CWDM) Gigabit Interface Converter (GBIC)/Small Form-Factor Pluggable (SFP) solution allows enterprise companies and service providers to provide scalable and easy-to-deploy Gigabit Ethernet and Fibre Channel services in their networks. The product set helps enable the flexible design of highly available, multiservice networks.
The Ci ...
The Cisco CWDM-SFP-1570 1000BASE-ZX Ethernet transceiver is a CWDM SFP transceiver for optical communications, rated for distances up to 80km and a maximum bandwidth of 1Gbps.
The CWDM-SFP-1570 transceiver operates at 1570nm wavelength. A Cisco CWDM SFP is a hot-swappable input/output device that plugs into an SFP port or slot of a Cisco switch or router, linking the port with the fiber ...
The Cisco® Coarse Wavelength-Division Multiplexing (CWDM) Gigabit Interface Converter (GBIC)/Small Form-Factor Pluggable (SFP) solution allows enterprise companies and service providers to provide scalable and easy-to-deploy Gigabit Ethernet and Fibre Channel services in their networks. The product set helps enable the flexible design of highly available, multiservice networks.
The Ci ...
The Cisco Coarse Wavelength-Division Multiplexing (CWDM) Small Form-Factor Pluggable (SFP) solution allows enterprise companies and service providers to provide scalable and easy-to-deploy Gigabit Ethernet in their networks. The product set helps enable the flexible design of highly available, multiservice networks.
The Cisco CWDM SFP solution is a convenient and cost-effective solution f ...
The Cisco® Coarse Wavelength-Division Multiplexing (CWDM) Gigabit Interface Converter (GBIC)/Small Form-Factor Pluggable (SFP) solution allows enterprise companies and service providers to provide scalable and easy-to-deploy Gigabit Ethernet and Fibre Channel services in their networks. The product set helps enable the flexible design of highly available, multiservice networks.
The Ci ...
The Cisco® Coarse Wavelength-Division Multiplexing (CWDM) Gigabit Interface Converter (GBIC)/Small Form-Factor Pluggable (SFP) solution allows enterprise companies and service providers to provide scalable and easy-to-deploy Gigabit Ethernet and Fibre Channel services in their networks. The product set helps enable the flexible design of highly available, multiservice networks.
The Ci ...
The Cisco® Coarse Wavelength-Division Multiplexing (CWDM) Gigabit Interface Converter (GBIC)/Small Form-Factor Pluggable (SFP) solution allows enterprise companies and service providers to provide scalable and easy-to-deploy Gigabit Ethernet and Fibre Channel services in their networks. The product set helps enable the flexible design of highly available, multiservice networks.
The Ci ...
The Cisco® Coarse Wavelength-Division Multiplexing (CWDM) Gigabit Interface Converter (GBIC)/Small Form-Factor Pluggable (SFP) solution allows enterprise companies and service providers to provide scalable and easy-to-deploy Gigabit Ethernet and Fibre Channel services in their networks. The product set helps enable the flexible design of highly available, multiservice networks.
The Ci ...
This exclusive industry-leading Tier 1 technology 10GBASE-LR / OC192SR XFP module is 100% Cisco compliant and is approved for Federal, State, Local, GovEd and Fortune 500 network applications. This Tier 1 technology offers customers a wide variety of 10 Gigabit Ethernet and Packet-over-SONET/SDH (POS) connectivity options for data center, enterprise wiring closet, and service provider transport ...
The multirate XFP supports both 10GBASE-LR and 10GBASE-LW Ethernet applications and OC-192/STM-64 short-reach (SR-1) POS applications. Cisco offers both common and industrial temperature range products.
The 10-Gigabit XFP transceiver module is a hot-swappable I/O device that plugs into 10-Gigabit ports. The XFP transceiver connects the electrical circuitry of the system with the optical network. The XFP transceiver is a static-sensitive device. Always use an ESD wrist strap or similar individual grounding device when handling XFP transceivers or coming into contact with system modules.
The Dell™ Networking transceiver delivers copper connectivity to extend the range of your network. This hot-pluggable transceiver with SFP (Small Form Factor Pluggable) footprint features a RJ45 connector.
Additionally, it provides a unique enhanced digital diagnostic monitoring interface, which allows real-time access to device operating parameters such as transceiver temperat ...
The 10GBase-T SFP+ transceiver will transmit 10GbpE over up to 30m using Cat 6a/7 cable, providing high speed bi-directional communication links over copper media.
The MMA1B00-C100 has a stan ...
The Cisco® Small Form-Factor Pluggable (SFP), Enhanced Small Form-Factor Pluggable (SFP+), and X2 devices for use on the Cisco MDS 9000 Family of products are hot-swappable transceivers that plug into ports on the Cisco MDS 9000 Family director switching modules and fabric switches. These transceivers give users the flexibility to
choose different cabling types and distances on a port-b ...
The Cisco 40GBASE QSFP+ (Quad Small Form-Factor Pluggable Plus) modules offer customers a wide variety of high-density 40 Gigabit Ethernet connectivity options for data center, high-performance computing networks, enterprise core and distribution layers, and service provider transport applications.
The Dell™ QSFP+ transceiver delivers fiber connectivity to extend the range of your network. This hot-pluggable transceiver with QSFP+ (Quad Form Factor Pluggable) footprint features a MPO-12connector. The Dell networking 40GBase-SR4 QSFP+ transceiver provides 40GbE connectivity up to 100-150m.
Additionally, it provides a unique enhanced digital diagnostic monitoring interface, whi ...
The 12 Strand Multi-mode Module provides the mechanical distribution of the 12-strand MTP connector. Housed in a rugged steel enclosure that's guaranteed for life, these durable modules arrive fully loaded with the pre-terminated and tested MTP breakout harness-which not only reduces installation time but also ensures the most robust factory-quality performance and consistency. For additional f ...
The Gigabit Ethernet SFP and SFP+ transceivers installed in EX8200 switches support digital optical monitoring (DOM): you can view the diagnostic details for these transceivers by issuing the operational mode CLI command show interfaces diagnostics optics. The command does not give any output for copper transceivers, Fast Ethernet transceivers, or transceivers not purchased from Juniper Network ...
Small form factor: 1.125in x 5.125in x 4.5in. This breakout module provides the mechanical distribution of two 12-strand MTP/MPO connectors. Housed in a rugged steel enclosure guaranteed for life, this durable module arrives fully loaded with the preterminated and tested MTP/MPO breakout harness. It is shipped with a test report that can assist in calculating the optical budget.
Not ...
The Cisco® 40GBASE QSFP (Quad Small Form-Factor Pluggable) portfolio offers customers a wide variety of high-density and low-power 40 Gigabit Ethernet connectivity options for data center, high-performance computing networks, enterprise core and distribution layers, and service provider applications.
The Cisco WSP-Q40GLR4L QSFP Module supports link lengths of up to 2 km over a standard pair of G.652 single-mode fiber (SMF) with duplex LC connectors. The 40 Gigabit Ethernet signal is carried over four wavelengths. Multiplexing and demultiplexing of the four wavelengths are managed within the device. It is interoperable with 40GBase-LR4 for distances up to 2km. The operating temperature range ...
The Cisco 10GBASE SFP+ modules offer customers a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications.
The Cisco QSFP-4X10G-LR-S QSFP module supports link lengths of up to 10km on G.652 single-mode fiber (SMF). It enables high-bandwidth 40G optical links over 12-fiber parallel fiber terminated with MPO/MTP multifiber female connectors. It can also be used in a 4x10G mode for interoperability with 10GBASE-LR interfaces up to 10km.
The 4x10G connectivity is achieved using an external 12-fib ...
The Cisco 40GBASE-LR4 QSFP module supports link lengths of up to 10 kilometer over a standard pair of G.652 single-mode fiber with duplex LC connectors. The QSFP-40G-LR4-S module supports 40GBase Ethernet rate only. The 40 Gigabit Ethernet signal is carried over four wavelengths. Multiplexing and demultiplexing of the four wavelengths are managed in the device.
The Dell SFP+ transceiver delivers fiber connectivity to extend the range of your network. This hot-pluggable transceiver with SFP (Small Form Factor Pluggable) footprint features a duplex LC connector. The Dell networking 40GBase-LRM SFP+ transceiver provides 40GbE connectivity up to 10 km.
Additionally, it provides a unique enhanced digital diagnostic monitoring interface, which allows ...