Moxa  Mfg Mini-Store MOXA Major Lines

Moxa ioLogik E2210 Ethernet I/O Server, 24Vdc 12DI, 8DO, Modbus/TCP, SNMP, Active I/O Messaging

MOXA Major Lines
Mfg Part Number:  ioLogik E2210  
Image may not reflect the actual item.
Price: $339.75 + Free Shipping
In Stock: 40
No Sales Tax except these states
, PO and Wire.
Manufacturer Warranty Policy:

Improve system efficiency via real-time data acquisition
Unlike traditional passive remote I/O, Active Remote I/O provides Active I/O messaging that can send message over Ethernet, TCP/IP network on I/O input status changes or meets certain condition, the message is sent to host computer. Communication between the host computer and Active Remote I/O device is concise and efficient. In addition, the message delivery time is 20 times faster than traditional SCADA systems (50 ms compared to 1 sec).

No programming! Hassle-free Click&Goâ„¢ logic control
Click&Goâ„¢ logic is the key to make ioLogik E2000 series become an intelligent remote I/O. Click&Goâ„¢ logic lets you decide when to send I/O data, and what to say to host computers for simple alarm control and messaging.

As opposed to using C-language or PLC-ladder, a person who understands basic logic concepts can do the configuration themselves, and easily finish their projects. Unlike passive remote I/O architecture, you can integrate Active Remote I/O’s input signals into one event to be an integrated message, and set up local output control at the same time. The unique Click&Go™ logic is a patent pending technology developed by Moxa.

Unique LCD Display Module for on-site configuration
ioLogik E2000 series Active Remote I/O provides an optional LCD display module for on-site management and configuration. The unique display module can display network and I/O settings, e.g. analog input value, digital input counter value. The IP, netmask address can be set locally without carrying a PC.


Independent Configuration for Multi-functional DI and DO points
Each digital input can be configured independently for DI or Event Counter mode, and each digital output can be independently configured for DO or Pulse Output mode.

Typical Application


Actively transfer I/O data in real-time over Ethernet
Easy-to-use Click&Goâ„¢ Logic for local output control and messaging
12-point 24VDC digital input with DI/Event counter
8 points 24VDC digital output as pulse output
10/100Mbps Ethernet with Modbus/TCP protocol Connecting up to 10 hosts
SNMP to I/O mapping that works with Network Management System
Quick programming library for VB, VC, BCB


10/100 Mbps, RJ45
1.5 KV magnetic isolation
Modbus/TCP, TCP/IP, UDP, DHCP, Bootp, SNMP (MIB for I/O and Network), HTTP, SNTP,Active I/O Messaging, IP filtering
RS-485 (2-wire): Data+, Data-, GND
Serial Line Protection
15 KV ESD for all signals
Serial Communication Parameters
Data bits
Stop bits
Flow control
1200 bps to 115200 bps
Built-in RTC
Power Requirements
Power input
24 VDC nominal, 12 to 48 VDC
Power consumption
282 mA @ 24 VDC (typ.)
Field power
24 VDC nominal, up to 48 VDC
Mechanical Specifications
I/O cable max. 14 AWG
Operating temperature
-10 to 60°C (14 to 140°F), 5 to 95% RH
Storage temperature
-40 to 85°C (-40 to 185°F), 5 to 95%RH
Digital Input
12, source type
I/O Mode
DI or Event Counter (up to 900 Hz)
Dry Contact
Logic 0: short to GND, Logic 1: open
Wet Contact
Logic 0: 0 to 3 VDC, Logic 1: 10 to 30 VDC (DI COM to DI)
Common type
12 points / 1 COM
3000 VDC
Digital Output
8, sink type
I/O Mode
DO or Pulse output (up to 1 KHz)
On-state voltage
24 VDC nominal
Output current rating
Max. 200 mA per channel
Optical isolation
Over temperature shutdown: Min. 170°C
Over current limit: typ. 750 mA/channel
Agency Approvals
FCC Part 15, CISPR (EN55022) Class A
IEC61000-4-2 (ESD), level 2/3
IEC61000-4-3 (RS), level 2
IEC61000-4-4 (EFT), level 2
IEC61000-4-5 (Surge), level 3
IEC61000-4-6 (CS), level 2
IEC61000-4-8 (PM), level 1
IEC61000-4-11 (Dip)
UL 508 (pending)
2 years


Power Requirements
Power Consumption 203 mA @ 24 VDC
Power Input 24 VDC nominal, 12 to 36 VDC
Serial Communication Parameters
Flow Control None
Protocol Modbus/RTU
Data Bits 8
Parity None
Stop Bits 1
Baudrate 1200 to 115200 bps
Inputs and Outputs
Digital Inputs 12 channels
Digital Outputs 8 channels
Protection 1.5 KV magnetic isolation
Ethernet 1 x 10/100 Mbps, RJ45
Protocols Modbus/TCP, TCP/IP, UDP, DHCP, Bootp, SNMP, HTTP, CGI, SNTP
Digital Input
Isolation 3K VDC or 2K Vrms
Common Type 12 points per COM
Over-voltage Protection 36 VDC
Digital Filtering Time Interval Software selectable
Dry Contact • On: short to GND • Off: open
Wet Contact NPN (Source Type) • On: 0 to 3 VDC • Off: 10 to 30 VDC
Counter Frequency 900 Hz
I/O Mode DI or Event Counter
Sensor Type Wet Contact (NPN), Dry Contact
Environmental Limits
Operating Temperature -10 to 60°C (14 to 140°F)
Storage Temperature -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Physical Characteristics
Weight under 250 g
Dimensions 115 x 79 x 45.6 mm (4.53 x 3.11 x 1.80 in)
Wiring I/O cable max. 14 AWG
Standards and Certifications
EMI FCC Part 15 Subpart B Class A, EN 55022 Class A
Safety UL 508
Shock IEC 60068-2-27
Vibration IEC 60068-2-6
EMS IEC 61000-4, IEC 61000-6
Freefall IEC 60068-2-32
Digital Output
Type Sink
Isolation 3K VDC or 2K Vrms
Pulse Output Frequency 1 kHz
Over-temperature Shutdown 175°C (min.)
Over-voltage Protection 45 VDC
Current Rating 200 mA per channel
I/O Mode DO or Pulse Output
Over-current Protection 2.6 A (4 channels @ 650 mA)
Serial Communication
Interface RS-485-2w: Data+, Data-, GND
Serial Line Protection 15 KV ESD for all signals
MTBF (mean time between failure)
Time 213,673 hrs
Database Telcordia (Bellcore)
Warranty Period 5 years
Details See
WARNING:: The plastic used in cable products can expose you to lead and lead components, chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to
[0] [true] [Yes] [No] [No]