TRIPP LITE  Selector

Tripp Lite PDUMH15AT PDU Metered ATS 120V 15A 8 Outlet

Mfg Part Number:  PDUMH15AT  
Image may not reflect the actual item.
Price: $369.98
In Stock: 107
Last Updated: Jul 20, 2024
No Sales Tax except these states
, PO and Wire.
FEATURES- Metered PDU with ATS
       Power Distribution Unit with dual-input Auto Transfer Switching!
       1U rackmount PDU with digital current monitoring display; 15A 120V 
        capacity with 8 NEMA 5-15R outlets; Connects to NEMA 5-15R 
        receptacles; Integrated Automatic Transfer Switch (ATS) allows PDU 
        to operate from secondary input source when primary input fails;
        Sequential outlet power-on prevents inrush-related equipment 
        interaction on startup.
       Tripp Lite's 120V 15A metered PDU system with Automatic Transfer 
        Switching (ATS) is an 8 outlet PDU with a digital display to 
        indicate total PDU power consumption in amps. Outlets are 
        sequentially turned on at 250 milliscond intervals when the PDU is 
        first energized from an unpowered state to prevent inrush-related 
        equipment interaction on startup. Supports 1U rackmount 
        installation in a 2 or 4 post rack. Included are 8 NEMA 5-15R 
        outlets, and two 12 ft. 5-15P input power cord. 
       Optional integrated ATS is available for use when two separately 
        derived input power sources are available. The attached power cord 
        serves as the primary AC input cable, while the included detachable 
        power cord serves as the optional-use secondary AC input 
        connection. The PDU system passes the primary input power through 
        to connected equipment whenever line voltage and frequency levels 
        are normal. If the primary input source goes outside of these 
        tolerances or fails altogether, the ATS will automatically switch 
        all PDU output to the secondary line sourced input power (when 
        available) to maintain continuous operation of connected loads 
        without reboots or service interruptions. Once the primary power 
        source is restored, the PDU will automatically switch back to 
        primary sourced input power. The dual input cabling can be 
        configured for UPS maintenance bypass of standard UPS systems or to 
        create a redundant dual-UPS power source for a critical, single-
        corded network device. 
    Includes PDU with attached 5-15P input power cord, Detachable C13 to 
      NEMA 5-15P 12 ft / 3.6m power cord for optional secondary input,
      User manual with warranty information.
* 120V 15A metered PDU system with Automatic Transfer Switch (ATS).
* Dual input cords, one attached (primary) and one optional-use detachable 
  cord (secondary).
* Included cordsets support 5-15P plug-in connection 
* Front panel digital ammeter displays power consumption in amps 
* Eight built-in NEMA 5-15R output receptacles 
* Optional ATS function enables setup for hot-swappable UPS maintenance 
  bypass, dual UPS protection or dual AC input redundancy for critical 
  single-corded network hardware.
* Small 1U rackmount format installs in only one rack space with a maximum 
  installed depth of 14.5 inches.
  -- SPECIFICATIONs -----------------------------------
OUTPUT       - Volt Amp Capacity  : 15A/1800VA
               Nominal voltage    : 120V
               Outlets            : (8) NEMA 5-15R 
INPUT        - Input amps         : 15A 
               Connection type    : (2) NEMA 5-15P 
               Cord length        : 12 ft. (each)
                electrical service: 120V 15A, dedicated line recommended
               Front panel LEDs   : 10 front panel LEDs display power on -
                                      off status for each outlet, plus 
                                      3 LEDs for power status on each input 
                                      line cord. Digital Current Meter 
                                      displays output power consumption in 
MATERIAL     - Steel
FORM FACTOR  - 1U rackmount
COMMUNICATION- SNMP compatibility: Includes slot for optional SNMPWEBCARD 
                 accessory to enable remote individual outlet control over 
APPROVALS    - Tested to UL60950-1 (USA) and CAN/CSA C22.2 No. 60950-1-03 
                  (Canada), RoHS Compliant.
DIMENSIONS   - 17.5"w x 1.75"h x 14.5"d          WT.- 11 lbs.
General Information
Product -
Number of Outlets 8
Surge Energy Rating -
Data Line Protection -
Cord Length -
Mounting Style -
Output Voltage -
Current Rating -
WARNING:: The plastic used in cable products can expose you to lead and lead components, chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to
[1024] [true] [Yes] [No] [Yes]